TENI-GRIP Ultra P - Anti-Slip Treatment for Vitrified, Porcelain & Granite NEW
Anti-Slip Treatment

TENI-GRIP Ultra P - Anti-Slip Treatment for Vitrified, Porcelain & Granite

₹699.00 per 250 ml

TENI-GRIP Ultra P anti-slip treatment, formulated for vitrified, porcelain (PGVT) and granite floors. Creates invisible micro-texture, targets a wet SCOF between 0.5 and 0.6 or above, preserves gloss. 250 mL covers 25-30 sq ft.

Product NumberTN-GRIP-ULTRAP
Packing 250 ml
Stock In Stock (200 units)
Details
TENI-GRIP ULTRA P

Anti-slip protection engineered for vitrified, porcelain & granite floors

Ultra P is the specialist formulation for hard, dense mineral surfaces — vitrified tiles, full-body porcelain, PGVT (glazed vitrified porcelain tiles) and polished or honed natural granite. It creates a dense field of invisible suction micro-pores that engage the moment the floor gets wet.

Wet SCOF between 0.5 and 0.6 or above – measured per NFSI B101.1-2022 Invisible treatment Preserves gloss & finish 250 mL covers 25-30 sq ft
How it works

Unlike sticky films or abrasive grip tapes that peel, yellow and trap dirt, TENI-GRIP works at the microscopic level. The solution is spread evenly across the floor as a uniform wet sheet, where it briefly conditions the polished surface into invisibly small traction pores. Instead of pooling into a slippery puddle, water now spreads into a thin, continuous film. When you step on it, the microscopic pores give the water somewhere to be displaced: it is drawn into the pores and held away from your shoe sole, allowing your foot to make firm, direct contact with the floor and gain grip rather than slip. On an untreated floor, there are no pores to absorb the water, so it stays trapped beneath the shoe as a slippery layer — these micropores change that, displacing the water and helping your feet find secure footing — so wet traction improves dramatically while the floor keeps its original look, gloss and finish.

Key benefits
Invisible micro-texture

No change to appearance, gloss or finish. Nothing visible changes after treatment.

Wet SCOF between 0.5 and 0.6 or above

Measured using a method referenced in NFSI B101.1-2022, before and after treatment.

Long-lasting grip

Long-Lasting Traction — Zero Peeling:

  • Residential Floors: Up to 3–5 years of reliable wet-traction safety (requires deep cleaning every 2 years).
  • Commercial Facilities: 1–2 years under continuous heavy pedestrian traffic (annual or bi-annual deep maintenance cycle).

Gloss preserving

Gloss-preserving kinetic buffers protect the polish on expensive porcelain and granite.

Low-hazard once cured

Once neutralized and cured, the floor can return to normal use and cleaning (see SDS for details).

Hygienic & odour-free

No sticky residue and no trapped dirt — your usual cleaning routine stays the same.

Order Ultra P when your floor is

Vitrified, porcelain or granite:

  • Full-body / double-charge vitrified tiles
  • Porcelain tiles (PGVT / glazed vitrified porcelain)
  • Polished or honed natural granite
Is your floor standard ceramic?

Ultra P is tuned for dense vitrified and stone surfaces. Standard glazed ceramic tiles need the gentler TENI-GRIP Ultra C formulation.

ProductTENI-GRIP Ultra P
Suitable flooringVitrified, porcelain (PGVT) & granite
Wet SCOF targetbetween 0.5 and 0.6 or above (measured per NFSI B101.1-2022)
Application rate100 mL per sq m (uniform wet sheet)
Dwell window1-2 min full-body vitrified; 3-4 min PGVT / granite
Coverage250 mL covers approx. 25-30 sq ft
NeutralizationTENI Friction Stop, then rinse with water
Professional serviceOn-site application with documented SCOF results
Application at a glance
  1. 1
    Pre-wash

    Strip factory wax with TENI-Prewash, rinse and dry.

  2. 2
    Apply

    Spread a continuous wet sheet at 100 mL/sq m.

  3. 3
    Dwell

    Hold for the timed window; keep the film wet.

  4. 4
    Neutralize

    TENI Friction Stop, then rinse and squeegee clean.

Full step-by-step guidance, the calibrated 10 x 10 cm micro-patch pilot test and the substrate dwell-time chart are in the DIY Kit & Application Guide.

Choose by your floor tile. Have ceramic tiles instead of porcelain or granite? Order TENI-GRIP Ultra C (use the variant selector above). Marble and soft natural stone should use TENI-GRIP Supra; never apply Ultra chemistry to calcite marble or glass.

Applications

Vitrified, porcelain (incl. PGVT) and polished/honed granite - lobbies, restaurants, malls, hospitals, pool decks and other wet areas.

TENI-GRIP Ultra—Two Variants, One Rule: Order by Your Floor Tile

TENI-GRIP Ultra is available in two purpose-built formulations at the same price (Rs. 699 per 250 mL) because different tiles etch at different speeds. Matching the chemistry to your tile type delivers the correct dwell time and faster results while guarding against hazing or gloss loss when used as directed.

TENI-GRIP Ultra C
For standard glazed ceramic tiles. Dwell 4–5 minutes.
View Ultra C →
TENI-GRIP Ultra P
For vitrified, porcelain (PGVT) & granite. Dwell 1–4 minutes.
You are viewing this variant

Not sure which tile your floor has? Contact us with the tile box or a photo — we will confirm the correct variant. Marble, mosaic and Kota stone should use TENI-GRIP Supra; Ultra chemistry must never be applied to calcite marble or glass.

Does Chemical Anti-Slip Treatment Improve Wet Traction?

Yes. Specialized chemical formulations applied to mineral surfaces—such as ceramic, vitrified tiles, porcelain, granite, and marble—are designed to increase wet static and dynamic friction by creating microscopic traction pores. These pores are invisible to the naked eye and do not alter the visual appearance of the surface, but they provide measurable grip improvement when the floor is wet.

Complete Anti-Slip Solution

Want to apply it yourself? See the full kit contents, 4-step application guide, and substrate dwell-time chart.
Open Kit & Application Guide

Anti-Slip Protection Solution

TechNanoIndia provides nanotechnology-based anti-slip safety solutions across India. Slip and fall accidents in wet areas are a leading cause of preventable injuries in homes, workplaces, and public spaces. Our professional floor treatment is designed to reduce this risk with a fast, one to two hour application—delivering durable slip resistance on wet and dry surfaces alike.

The treatment works by creating a microscopic texture on the floor surface at the nano level. This texture is invisible to the naked eye and does not alter the appearance, gloss, or finish of the treated surface. The result is a floor that meets or exceeds safety standards without any visible change.

Anti-slip treated floor surface

Our anti-slip treatment is suitable for all types of hard flooring. Recommended areas include kitchens, stairs, bathrooms, and any surface that frequently gets wet. The treatment is effective for both indoor and outdoor applications and has been adopted by corporate offices, restaurants, IT companies, hospitals, hotels, and residential properties across India.

Advantages of Slip-Protection:

  1. Long-lasting slip resistance on treated surfaces.
  2. Hygienic—no chemical residue or odour.
  3. Minimal ongoing maintenance costs.
  4. Designed to support ADA accessibility compliance goals.
  5. Cost-effective with instant, measurable results.
  6. No damage to floor—appearance, gloss, and finish remain unchanged.
  7. Designed to be low-hazard once cured (see SDS for specific guidance).
  8. Measured wet SCOF improves to between 0.5 and 0.6 or above (method per NFSI B101.1-2022).

Product Range for Different Floor Types:

  1. TENI-GRIP Ultra C: Engineered for standard glazed ceramic tiles. Creates invisible micro-pore development without compromising the tile's glaze or finish.
  2. TENI-GRIP Ultra P: Engineered for vitrified, porcelain (incl. PGVT) tiles and natural granite. Rapid micro-pore development without compromising tile structural integrity.
  3. TENI-GRIP Supra: A milder, engineered solution designed for marble, mosaic, Kota stone, and Kadpa. Enhances wet grip while minimizing loss of natural aesthetic clarity of the stone.
Anti-slip treated surface before and after

All our products are designed with environmental considerations. Cured-state hazard data is available in the SDS. For more details kindly download our MSDS.

Call us for a demonstration and TechNanoIndia service and stop slipping!

Solution That Stops You Slipping On Slippery Floors

Slips and falls on wet, dry, or greasy surfaces are a significant concern for residences, industries, institutions, and commercial establishments. Operating in India since 2019, TechNanoIndia offers a professional treatment service for high-risk floors in wet conditions. Slip and fall related injuries represent a notable percentage of work and home accidents, often resulting in serious long-term disabilities and insurance difficulties.

After treatment with Anti-Slip Protection, your floor is tested and documented to reach a wet SCOF between 0.5 and 0.6 or above, measured using a method referenced in NFSI B101.1-2022 for safe walking surfaces.

Slip-resistance verification helps businesses demonstrate to staff, visitors and insurers that their walking surfaces are safe. A commonly used safety benchmark is a Wet Static Coefficient of Friction (Wet SCOF) of 0.6. We test floors with our TENI-826MU slipmeter to measure your floor against this benchmark before and after treatment.

Anti-slip treatment application

TechNanoIndia Anti-Slip Protection is designed for strong slip prevention under wet or dry conditions and improves slip resistance of slippery floors at home or at work. We offer complete service with documented pre- and post-treatment SCOF readings.

Tailored Surface Chemistry

Our product range is matched to each floor type for optimal results:

  1. TENI-GRIP Ultra C: Effective on standard glazed ceramic tiles. Protects the glaze while creating durable wet grip. Can be used indoors and outdoors.
  2. TENI-GRIP Ultra P: Effective on vitrified, porcelain (incl. PGVT) and granite. Rapid micro-pore development without compromising tile structural integrity. Can be used indoors and outdoors.
  3. TENI-GRIP Supra: Effective on marble, mosaic, Kota stone, and Kadpa. A milder, engineered solution that treats natural marble to enhance wet grip while minimizing loss of natural aesthetic clarity. Can be used indoors and outdoors.

Call us to make an appointment for the floor test, so you can see how this product works. Anti-Slip Protection tile treatment is designed to measurably increase the grip of your floor surface. This non-abrasive technique improves the slip resistance of treated floors. The floor will maintain its original appearance and be safer to walk on.

The Anti-Slip Protection Floor Treatment is designed to reduce the risk of slip and fall accidents.

A Wet Static Coefficient of Friction (Wet SCOF) between 0.5 and 0.6 or above reflects the traction range referenced as a safety benchmark in NFSI B101.1-2022. We help you verify this range with documented results.

Integrating Nanoparticle Technology

TechNanoIndia is known for its nanotechnology products for different industries. Our treatment is designed to support ADA compliance goals and is suitable for use in any building environment. We are expanding across major Indian cities including Pune, Mumbai, Delhi, Bangalore, Mysore, Gurgaon, Baroda, and more. We also have international presence.

Areas Where Anti-Slip Treatment Is Most Needed:

AreaRecommended Locations
Residential AreaBathrooms, Bathtubs, Stairs, Washing Areas, Kitchen, Entrance Door Areas, Shower Areas, Swimming Pools, External Stairs etc.
Industrial AreaMachine Floors, Workshops, Walking Passages, Common Areas, Washrooms, Lobbies, Water Stagnant Areas etc.
Corporate OfficesCanteen Kitchen, Stairs, Washrooms, Lobbies, Front Areas etc.
HospitalsWalkways, Bathrooms, Washrooms, Labs, Balconies, Common Areas etc.
HotelsShower Cubicles, Bathtubs, Bathrooms, Swimming Pools, Kitchens, Washing Areas etc.
Military & Govt. OfficesStairs, Washrooms, Balconies, External Stairs etc.
RestaurantsKitchens and Washrooms etc.
Shopping MallsWashrooms and all slippery areas.
Swimming PoolsShower Areas, Around Swimming Pool, Children Swimming Pool Areas.
Recreation ClubsKitchen Areas, Swimming Pools, Verandas, Common Passages, Walkways, Washrooms, Open & External Stairs etc.
Old Age Homes & OrphanagesAll slippery areas. Shower and bathroom treatment is essential.
Sacred PlacesExternal Stairs, Balconies, Wet and Slippery Areas During Rains etc.

We also have self-application kits of 30 sq.ft (250 ml) and 120 sq.ft (1 litre combo) for those who wish to apply themselves. You can purchase stock by sending us an email request with measured quantity and floor type. We provide full telephonic support and installation guidance. The treatment is designed to improve slip resistance in both wet and dry conditions after application.

View Kit Contents & Step-by-Step Application Guide
Anti-slip treated ceramic tile surface

All our products are designed with environmental considerations. Our commitment to environmental responsibility is an integral part of our operations. Cured-state hazard data is available in the SDS. For more details, kindly download our MSDS.

Opportunities at TechNanoIndia

We provide multiple opportunities for individuals to start their own business at low cost.

Freelancer

We are looking for freelancers (PAN India — limited cities/areas available), freelancer distributors, and channel partners. Income potential depends on territory, effort and market conditions. Our technology is field-tested and positioned in a niche with minimal direct competition. Marketing support and training will be provided to serious marketing persons willing to work in their territories. Marketing and sales experience in the construction industry is an added advantage.

Contact us with your experience and biodata for more details.

Distributor Enquiries

TechNanoIndia offers a turnkey business opportunity in a niche market with minimal direct competition, including a nationwide marketing program with training, sales and marketing support, and online and offline business support as an Anti-Slip Protection Franchise.

It's easy to say yes to Anti-Slip Protection. Slip and fall injuries represent a significant, well-documented problem worldwide. According to the U.S. National Safety Council (Injury Facts), millions of disabling slip/fall injuries are recorded annually, driving steady demand for effective slip prevention in homes, workplaces, and public spaces.

Want to learn more or for distributorship or franchise? Contact us and one of our representatives will contact you soon.

Franchise

Anti-Slip Protection Technology in Anti-Slip Floor solutions. Most floors are slippery when wet or soapy and hence dangerous. Anti-Slip Protection is a 1-hour floor treatment applied to existing floors that is designed to reduce the risk of slip and fall without changing the look and feel of the floor. Cleaning stays the same and ongoing maintenance is minimal. One treatment provides durable protection.

Slip and fall injuries remain a significant, well-documented problem globally. According to the U.S. National Safety Council (Injury Facts), millions of disabling injuries are recorded annually, underscoring strong demand for effective slip prevention.

We offer a business opportunity in India and across the globe in a niche with limited direct competition. We provide national advertising, training, complete monitoring programs with low franchise fees and no royalty fees. This gives you an opportunity to build a business while helping people reduce slip and fall risk.

We also help individuals and marketing companies establish service centers to market our products with exclusive and non-exclusive territories.

Benefits of Being Our Franchise:

  • Low investment with a structured business model.
  • Flexible business model with low overheads.
  • Onboarding support to help you get started.
  • Own an exclusive territory for 3 years.
  • Large market potential with limited direct competition.
  • Training and management support—no previous experience required.
  • Fast onboarding after signup.
  • Sales and marketing support for all franchises, local and national.
  • License certificate as authorized exclusive or non-exclusive franchise.
  • No royalty fees.

Requirements for being our Franchise: If you are an entrepreneur looking for business opportunities or the ability to market products in any sector, or an established enterprise/group looking to enter or expand, you can join us. Existing contacts with the construction industry or current distribution channels are a plus.